DominickSoldano Posted February 12, 2013 Share Posted February 12, 2013 A friend/coworker is cleaning out his garage and he gave me a huge box of Lego today. I started going through it and it's an incredible quantity of stuff; Lego, Technic, Bionicle - probably 50,000 pieces. Mostly Lego but also some MegaBlocks and other stuff (which I'm separating out). Some of the Lego stuff is pretty old and it's all pretty dirty. Can anyone give me some idea of how to clean it? Thanks in advance for any suggestions/instructions. Quote Link to comment Share on other sites More sharing options...
stephen_rockefeller Posted February 12, 2013 Share Posted February 12, 2013 You can soak them in water and a mild dishwashing detergent. Quote Link to comment Share on other sites More sharing options...
DominickSoldano Posted February 12, 2013 Author Share Posted February 12, 2013 Stephen, Thanks for the quick reply. Do i need to scrub it at all. Do I just rinse it and lay it out to dry afterward? Go Sun Devils! Dominick Quote Link to comment Share on other sites More sharing options...
stephen_rockefeller Posted February 12, 2013 Share Posted February 12, 2013 Let them soak in lukewarm water and detergent for an hour or so then scrub them with a medium bristle scrub brush that should take off most of the funk. You can use a toothbrush if you see any remaining gunk. Then you have to lay them out and let them dry, if they don't dry completely they could accumulate some mold, so make sure they dry good. Quote Link to comment Share on other sites More sharing options...
stephen_rockefeller Posted February 12, 2013 Share Posted February 12, 2013 Oh yeah and yes a quick rinse after the scrubbing Quote Link to comment Share on other sites More sharing options...
jmpkcp Posted February 12, 2013 Share Posted February 12, 2013 Easier solution....put it all in a mesh laundry bag, tie the top tight, and run it in the washer and then dryer. Piece of cake. Quote Link to comment Share on other sites More sharing options...
Talon Posted February 12, 2013 Share Posted February 12, 2013 put it all in a mesh laundry bag, tie the top tight, and run it in the washer and then dryer This is what I do, the only thing I add is I wash it with what we call 'dirty towels' outside of the mesh bag. These are used bath towels that we now keep to use for cleaning. I think it helps clean the mesh bag of Legos while helping to protect the Legos from damage as the Legos are generally rubbing against a softer surface than the stainless steel tub. Quote Link to comment Share on other sites More sharing options...
chihuahualawyer Posted February 12, 2013 Share Posted February 12, 2013 Good to know, thanks! Quote Link to comment Share on other sites More sharing options...
TheOrcKing Posted February 12, 2013 Share Posted February 12, 2013 Easier solution....put it all in a mesh laundry bag, tie the top tight, and run it in the washer and then dryer. Piece of cake. I thought about this before, but wasn't so sure that it was safe or okay. Well, if it works for you, good enough for me. Don't know about running through the dryer though. Wouldn't that just bang the crap out of the bricks? Might need to do what Talon said and use some bath towels to give them a 'soft' barrier. Quote Link to comment Share on other sites More sharing options...
StarCityBrickCompany Posted February 12, 2013 Share Posted February 12, 2013 I thought about this before, but wasn't so sure that it was safe or okay. Well, if it works for you, good enough for me. Don't know about running through the dryer though. Wouldn't that just bang the crap out of the bricks? Might need to do what Talon said and use some bath towels to give them a 'soft' barrier.Yes - The large towel method will also dry them quicker, and polish them up a bit. Quote Link to comment Share on other sites More sharing options...
stephen_rockefeller Posted February 12, 2013 Share Posted February 12, 2013 I read somewhere that someone just washes their LEGO pieces in the wash machine with no bag.....just tosses them in, wonder how that worked out. When I put mine in the wash machine with the mesh bag method they seemed to loose a little bit of color, but then again I used hot water and that tide so that probably was the reason. Quote Link to comment Share on other sites More sharing options...
Huskers1236 Posted February 12, 2013 Share Posted February 12, 2013 I always use the soak/mild detergent method in the sink, but you can do the washing machine method as others have said. I think it has been said to use the "warm" water stage instead of hot to make sure the Lego doesn't lose any integrity, but I believe they are safe up to 140 degrees or something like that. The using of the towels in the washing machine is a good idea too, for the reasons stated above. Quote Link to comment Share on other sites More sharing options...
CNH1974 Posted February 12, 2013 Share Posted February 12, 2013 The 1980's catalog's say safe up to 40 Quote Link to comment Share on other sites More sharing options...
Teeird Posted February 12, 2013 Share Posted February 12, 2013 Don't put them them into your washer/dryer without bags! Some will get loose and clog your machines! Just dry them by hand, don't be lazy I've heard too many horror stories of what I said above occurring. Quote Link to comment Share on other sites More sharing options...
Legodog Posted March 22, 2013 Share Posted March 22, 2013 My wife and I have a lot of older sets and have also recently purchased some bulk Lego bricks from eBay. As anyone with older sets or bricks knows the white and gray pieces become yellowed over time. My wife did some research and found the following way or getting them back to their original color. We have tried this on many pieces and so far it works great (see the before and after photo). I thought I would share in case anyone is interested. Here is what you do... Quote Link to comment Share on other sites More sharing options...
Huskers1236 Posted March 22, 2013 Share Posted March 22, 2013 I have done this and it definitely works. Didn't know that the solution was good for that long though. I have put printed pieces in the mixture and not had adverse effects to the colors. Thanks for posting this, many people have old pieces that simply need to be cleaned up and the Oxi-Clean/Peroxide breakthrough has saved many a Lego brick life. Quote Link to comment Share on other sites More sharing options...
redeemed763 Posted March 22, 2013 Share Posted March 22, 2013 This works really well, we use high strength peroxide (10%+) and a bit of glycerin for a thicker mixture that can be painted on large or bulky items. ] Here is a great bit of info http://retr0bright.wikispaces.com/ Quote Link to comment Share on other sites More sharing options...
Snowcrash Posted March 22, 2013 Share Posted March 22, 2013 Really useful information. I've recently reclaimed my old Lego collection from my parent's house and many of the older bricks need a facelift. +1 internees to you Legodog :) Quote Link to comment Share on other sites More sharing options...
oldsmobile Posted March 22, 2013 Share Posted March 22, 2013 I used high-strength peroxide on some 1980s Town sets two years ago, and I'm sorry to say that while the white bricks looked fine for about 6 months, the yellowing has since returned. I did leave the parts in the summer sun for 2 days; either that wasn't enough time or this fix is a temporary one. I wouldn't feel comfortable selling whitened bricks on the secondary market, since Cinderella's carriage turns back into a pumpkin before too long. 1 Quote Link to comment Share on other sites More sharing options...
TheOrcKing Posted March 23, 2013 Share Posted March 23, 2013 I have been planning on going through my 'old' collection of parts and clean them up, but as far as whitening goes I had no real idea. This will certainly save my stockpile of white parts. Thanks, Legodog! Quote Link to comment Share on other sites More sharing options...
legoman666 Posted March 23, 2013 Share Posted March 23, 2013 http://growgreenmi.com/hydrogen-peroxide-4l-case-of-4 I have a case of this in my closet for when I need to whiten bricks (It was $85 when I bought it...) I also add oxyclean as an oxidizer. ******.B., make sure you dilute the peroxide enough. If you don't, the chemical reaction between the bricks, acid, and oxyclean will cause the mixture to heat up. My tub of bricks I was bleaching started to steam. I'd estimate that it got up to 160F before I noticed and dumped a bunch of baking soda in it to kill the acid. Be careful. 29% H2O2 will cause chemical burns on your hands. Those little cuts all over your hands won't feel too good after being soaked in 29%. I was originally going to write an article for Brickpicker extolling the virtues of this cleaning method and how to do it. But, I noticed that the bricks I cleaned in this manner were hard to stack with untreated bricks. It was as if they had gotten a tiny bit bigger. Also, the colored bricks I tried cleaning this way started to get whiter, rather than cleaner. Quote Link to comment Share on other sites More sharing options...
Rich B Posted March 23, 2013 Share Posted March 23, 2013 I never even knew this was possible. It's a world of a difference from what the plates looked like prior to using this method to clean them. I'm going to break out some of my old road plates and get to work! Thanks for all the info!! Quote Link to comment Share on other sites More sharing options...
gefmayhem Posted March 26, 2013 Share Posted March 26, 2013 Does this work with other colours like blues, clears and yellows? I've some 50yo bricks that could do with brightening up Quote Link to comment Share on other sites More sharing options...
Huskers1236 Posted March 26, 2013 Share Posted March 26, 2013 Does this work with other colours like blues, clears and yellows? I've some 50yo bricks that could do with brightening up I have seen that it works on blue and old grey as well as white. Those were the main trouble colors of the old bricks, though, I've only personally tried it on white. 1 Quote Link to comment Share on other sites More sharing options...
nolanfan34 Posted July 30, 2013 Share Posted July 30, 2013 Couldn't find a thread on this, so a question. Those who buy a lot on Craigslist or lots on eBay, do you have a preferred method for cleaning dusty Lego? I can imagine a tub with soap and water is the easiest, although drying them seems like a pain. Anyone have a better method? Also, if the color on pieces are faded or sun damaged, guessing there is no going back on that right? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.