RogerWilco Posted August 20, 2013 Share Posted August 20, 2013 I'm wondering what is considered acceptable from the standpoint of the used condition of bricks in a built set. I am currently piecing together some sets from a massive CL haul. I am discarding any broken, discolored, or gouged/dented/deeply scratched pieces, but almost all have numerous hairline scratches on them that can be seen when looking at them at a certain angle with decent lighting. For the modulars I'm building, I'm thinking about just pick-a-bricking a ton of 2x2 and 1x2 tiles, since these seem to be the most noticeable (on the sidewalk areas, mostly). I realize that even brand new sets can have these scratches, just from being in the bags, so I'm wondering what the expectation is when buying a used set. What is the acceptable level of hairline scratches, or minor damage, in general? Additionally, does anyone have a good method for removing these minor blemishes from bricks? 1 Quote Link to comment Share on other sites More sharing options...
MartinP Posted August 20, 2013 Share Posted August 20, 2013 I always try to get the set in the best condition when trying to sell a used set. That means I cannot tolerate and damage. But that is just me. Quote Link to comment Share on other sites More sharing options...
justafrog Posted August 20, 2013 Share Posted August 20, 2013 Basically if the bricks are odor free, are not chewed, discolored, stained, or deeply/severely scuffed/scratched, I consider them "good used condition" when I'm buying or selling. I do explain what I mean by "good used condition" in just those terms though - and add that mild to moderate visible scuffing and scratching, small dents, etc. all may occur in our used parts. (I don't know about blemish removal, but will read any replies on same with interest. I do know that you can permanently remove smoke smell by giving them a good wash in soap and water and then leaving them outside in the open air (but not in sunlight) for a week or two. Quote Link to comment Share on other sites More sharing options...
El Guapo Posted August 20, 2013 Share Posted August 20, 2013 I'm wondering what is considered acceptable from the standpoint of the used condition of bricks in a built set. I am currently piecing together some sets from a massive CL haul. I am discarding any broken, discolored, or gouged/dented/deeply scratched pieces, but almost all have numerous hairline scratches on them that can be seen when looking at them at a certain angle with decent lighting. For the modulars I'm building, I'm thinking about just pick-a-bricking a ton of 2x2 and 1x2 tiles, since these seem to be the most noticeable (on the sidewalk areas, mostly). I realize that even brand new sets can have these scratches, just from being in the bags, so I'm wondering what the expectation is when buying a used set. What is the acceptable level of hairline scratches, or minor damage, in general? Additionally, does anyone have a good method for removing these minor blemishes from bricks? I think you will get different answers from just about everybody on here as to what is acceptable. So it will depend on the buyer. If I was buying to give to my kids it wouldn't bother me as much...on a Modular I might be pickier. I think if you are the seller, just make sure to be VERY clear as to what the damage or "used-ness" is and put a picture of what you mean in the listing. 1 Quote Link to comment Share on other sites More sharing options...
Guest betsy805 Posted August 21, 2013 Share Posted August 21, 2013 I just picked up a craigslist haul yesterday and to my dismay I'm finding that the kid PAINTED on some of his legos and minifigure faces. Any idea on how to get that out? I just tried a magic eraser, isopropyl alcohol, and nail polish remover and nothing worked. On a separate note, I haven't tried this, but if you have discolored legos (like how the white can yellow over time), you can put them in a bowl of hydrogen peroxide near a sunny window and they'll revert back to their normal color. Quote Link to comment Share on other sites More sharing options...
Huskers1236 Posted August 21, 2013 Share Posted August 21, 2013 I just picked up a craigslist haul yesterday and to my dismay I'm finding that the kid PAINTED on some of his legos and minifigure faces. Any idea on how to get that out? I just tried a magic eraser, isopropyl alcohol, and nail polish remover and nothing worked. On a separate note, I haven't tried this, but if you have discolored legos (like how the white can yellow over time), you can put them in a bowl of hydrogen peroxide near a sunny window and they'll revert back to their normal color. I have had some luck getting marker off with magic eraser, but on minifig heads, it will generally take off some of the printing as well. So I don't usually bother, and if the marker is on a white piece, I toss it, I'm not sure there is a cure for that. With your hydrogen peroxide, make sure you have some Oxy-Clean or equal in the mixture as well. Quote Link to comment Share on other sites More sharing options...
Quacs Posted August 21, 2013 Share Posted August 21, 2013 I just picked up a craigslist haul yesterday and to my dismay I'm finding that the kid PAINTED on some of his legos and minifigure faces. Any idea on how to get that out? I just tried a magic eraser, isopropyl alcohol, and nail polish remover and nothing worked. On a separate note, I haven't tried this, but if you have discolored legos (like how the white can yellow over time), you can put them in a bowl of hydrogen peroxide near a sunny window and they'll revert back to their normal color. I had a similar situation with a City lot I bought on CL recently, although it was glitter glue instead of paint (apparently, Policemen can be "bedazzled" too). I used WD-40 on the bricks - I sprayed the affected areas with the lubricant and let it sit for 10-15 minutes, and then scrubbed the studs with a toothbrush. All the glitter glue came off after some elbow grease. Quote Link to comment Share on other sites More sharing options...
Diabolos80 Posted August 21, 2013 Share Posted August 21, 2013 If you want to get permanent marker off bricks, use sunblock. Seriously. Just rub it on and wipe it off. It's like magic. I don't know if it works on paint, or if it will ruin printing on figs. Quote Link to comment Share on other sites More sharing options...
Guest betsy805 Posted August 22, 2013 Share Posted August 22, 2013 Following up on this. After some research I tried soaking the minifigures in a bowl of Greenworks cleaner overnight. Viola! It's about 90% cleaned off and I'm leaving them in there the rest of today to see if it will get the rest of it off. Doesn't appear to have affected the minifigure faces or the printed pattern on the legs. So in case you have someone that used what I'm assuming is model paint on their expensive star wars minifigures, greenworks works Quote Link to comment Share on other sites More sharing options...
Quacs Posted August 22, 2013 Share Posted August 22, 2013 Following up on this. After some research I tried soaking the minifigures in a bowl of Greenworks cleaner overnight. Viola! It's about 90% cleaned off and I'm leaving them in there the rest of today to see if it will get the rest of it off. Doesn't appear to have affected the minifigure faces or the printed pattern on the legs. So in case you have someone that used what I'm assuming is model paint on their expensive star wars minifigures, greenworks works Great to hear! Always good to have another bullet in the holster when flipping used sets. Quote Link to comment Share on other sites More sharing options...
JoshTX Posted August 22, 2013 Share Posted August 22, 2013 Ok cleaning experts...what's the best way to get standard ink pen stains off of pieces? I have a bunch of clones from a bulk lot that the kid tried to color, primary the helmets. Some he did with permanent marker, other with an ink pen. Quote Link to comment Share on other sites More sharing options...
Guest betsy805 Posted August 22, 2013 Share Posted August 22, 2013 Ok cleaning experts...what's the best way to get standard ink pen stains off of pieces? I have a bunch of clones from a bulk lot that the kid tried to color, primary the helmets. Some he did with permanent marker, other with an ink pen. Have you tried magic eraser? Or someone above mentioned sunblock Quote Link to comment Share on other sites More sharing options...
Diabolos80 Posted August 22, 2013 Share Posted August 22, 2013 Ok cleaning experts...what's the best way to get standard ink pen stains off of pieces? I have a bunch of clones from a bulk lot that the kid tried to color, primary the helmets. Some he did with permanent marker, other with an ink pen. Sunblock. Try it on the worst one first, I'm not sure how it will affect the printing. Quote Link to comment Share on other sites More sharing options...
Huskers1236 Posted August 22, 2013 Share Posted August 22, 2013 Sunblock. Try it on the worst one first, I'm not sure how it will affect the printing. And I would definitely go with Banana Boat to give your bricks that beachy coconut smell. God I love that stuff. Quote Link to comment Share on other sites More sharing options...
Quacs Posted August 22, 2013 Share Posted August 22, 2013 I have heard that hairspray gets ink out of clothes, so it may get ink off of ABS. I have NOT tried this yet, but it could be worth a try. Obviously, try a test spot first on a non-valuable fig/brick. *edit* I saw someone on another board say WD-40 worked for them in getting permanent marker off ABS. Try this if all else fails. There are a bunch of options in this thread - http://www.beatyourtruck.com/forum/showthread.php?41158-Removing-permanent-marker-from-ABS-plastic Quote Link to comment Share on other sites More sharing options...
TheOrcKing Posted August 23, 2013 Share Posted August 23, 2013 I saw someone on another board say WD-40 worked for them in getting permanent marker off ABS. Try this if all else fails.WD-40?! Even if that worked, I'd hate to think of what the Lego would smell like afterwards. :bad: Quote Link to comment Share on other sites More sharing options...
sadowsk1 Posted August 23, 2013 Share Posted August 23, 2013 Used to me = buyer beware. I don't buy used often, but when I do, I look closely at pictures and feedback. If it's craigslist it's easier of course since it's in person. Quote Link to comment Share on other sites More sharing options...
MartinP Posted August 28, 2013 Share Posted August 28, 2013 What is the best way to get permanent marker of Lego pieces? I have a bulk lot that has numerous pieces that have permanent marker on it. Quote Link to comment Share on other sites More sharing options...
boxofcorey Posted August 28, 2013 Share Posted August 28, 2013 I have had mixed luck soaking the bricks in warm water with dish soap and then using a Magic Eraser or Tide Stain Remover to remove the marker. I'd advise the Magic Erasers anyway because they're good for everything from cleaning shoes to fabric. Quote Link to comment Share on other sites More sharing options...
Diabolos80 Posted August 28, 2013 Share Posted August 28, 2013 Sunblock. Quote Link to comment Share on other sites More sharing options...
turbomattk Posted August 28, 2013 Share Posted August 28, 2013 There is a product on the market called 'Goof Off' that does take sharpie off. Quote Link to comment Share on other sites More sharing options...
Diabolos80 Posted August 28, 2013 Share Posted August 28, 2013 No no no. Seriously, sunblock. You don't even have to scrub it. Just wipe it on, wipe it off. My wife noticed sunblock's talent for removing permanent marker when she was a lifeguard. They were constantly having to re-write their names on their floatie things. Quote Link to comment Share on other sites More sharing options...
c666187 Posted August 28, 2013 Share Posted August 28, 2013 I would avoide goof-off, I suspect that it has harsh chemicals (like acetone/nail polish remover) that may eat at the Lego. Try using a dry erase marker, it works to remove "permanent" marker off of dry erase boards (and my desk at work, there is no reason that is should not work on Lego). Simply draw over the permanent marker with the dry erase marker, then wipe it off. The permanent marker should be gone. 1 Quote Link to comment Share on other sites More sharing options...
Quacs Posted August 28, 2013 Share Posted August 28, 2013 Topics merged - the original usedness topic had an extensive discussion of the same topic, so I merged the two and adjusted the title for accuracy. Quote Link to comment Share on other sites More sharing options...
justafrog Posted August 28, 2013 Share Posted August 28, 2013 I've gotten used to the topic merging, but I wonder if when it happens the title of the topic could be changed to something a little more generically descriptive? I.e, this one might become something like "Used Brick Tips & Condition" or something a little less cumbersome than what it's current sporting? (Just an idea, feel free to point and laugh. ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.