scatttcat Posted February 12, 2018 Share Posted February 12, 2018 So I have plenty of experience cleaning used lego by now and have my process down pretty well, but I was curious if anyone who buys large lots of used lego has any good tips for cleaning pieces with applied stickers to them?? I would think you cannot soak them like you can with regular bricks, and I know some people use the washing machine method and I would assume you definitely cannot do that with sticker pieces either. All I could think of is a wet paper towel and wipe them? or even a little alcohol on a paper towel and a quick wipe down? Curious to hear if anyone has figured out a good system for this! Thanks! ? Quote Link to comment Share on other sites More sharing options...
longshot Posted February 12, 2018 Share Posted February 12, 2018 I just use a damp cloth to get any dust or obvious dirt off. Definitely cant soak em......... Had a few sneak by in bulk batch and the stickers do not hold up. You could run em under water quickly and then dry em off immediately. This is definitely ok if the sticker appears in good shape and adhered along all edges. 1 Quote Link to comment Share on other sites More sharing options...
Zelgazra Posted February 12, 2018 Share Posted February 12, 2018 Buy some alcohol swabs from the local pharmacy. As mentioned, if no edges are peeled, they work exceptionally, and alcohol dries up almost immediately, saves the effort of toweling them off one by one. 1 Quote Link to comment Share on other sites More sharing options...
vincevaughn Posted February 12, 2018 Share Posted February 12, 2018 So far every stickered piece has come through my ultrasonic cleaner just fine....so i just clean them with the normal lego. Use a salad spinner to get the excess water off and then lay them out in a food dehydrator to dry the rest of the way. Just make sure its able to set a temp below 104 f. I set mine to 95 f and leave for a couple hours....then they are zip locked with silicon desiccant for a week to make sure no mosture is locked in the crevices.Sent from my SM-G900P using Brickpicker Forum mobile app Quote Link to comment Share on other sites More sharing options...
Zelgazra Posted February 12, 2018 Share Posted February 12, 2018 zip locked with silicon desiccantCan’t recommend this enough! Silica packs for the win, most passive but effective form of bulk drying by far! Quote Link to comment Share on other sites More sharing options...
vincevaughn Posted February 13, 2018 Share Posted February 13, 2018 Can’t recommend this enough! Silica packs for the win, most passive but effective form of bulk drying by far! Yep, and cost effective too....3 gram silica packs are cheapSent from my SM-G900P using Brickpicker Forum mobile app Quote Link to comment Share on other sites More sharing options...
Zelgazra Posted February 13, 2018 Share Posted February 13, 2018 Or free. Go to any store that stocks hard-good products and just ask their back stock team to save you a bag. Every product in the world ships with them, and they get tossed in the landfill by the thousands daily. I work on such a team, I should know. Quote Link to comment Share on other sites More sharing options...
eddie412 Posted February 13, 2018 Share Posted February 13, 2018 So I have plenty of experience cleaning used lego by now and have my process down pretty well, but I was curious if anyone who buys large lots of used lego has any good tips for cleaning pieces with applied stickers to them?? I would think you cannot soak them like you can with regular bricks, and I know some people use the washing machine method and I would assume you definitely cannot do that with sticker pieces either. All I could think of is a wet paper towel and wipe them? or even a little alcohol on a paper towel and a quick wipe down? Curious to hear if anyone has figured out a good system for this! Thanks! Visine eye drops or a knock off brand. A few drops of it let it sit for a few seconds. And it'll make taking sticky stuff off incredibly easy. Do not use nail polish remover. I made that mistake once.Sent from my LGLS676 using Brickpicker Forum mobile app Quote Link to comment Share on other sites More sharing options...
scatttcat Posted February 13, 2018 Author Share Posted February 13, 2018 5 hours ago, eddie412 said: Visine eye drops or a knock off brand. A few drops of it let it sit for a few seconds. And it'll make taking sticky stuff off incredibly easy. Do not use nail polish remover. I made that mistake once. Sent from my LGLS676 using Brickpicker Forum mobile app I actually meant cleaning the sticker piece WITHOUT removing the sticker but still slightly disinfecting / cleaning the piece. But thanks, thats an interesting tip with the visine! Had no idea 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.