Sandwraith Posted October 24, 2015 Share Posted October 24, 2015 Hey Folks! So as you all know Dimensions came out with the Portal 2 level pack. I have long been a huge Portal fan and love the games. The writing/humour/gameplay is beyond anything else I've played. There was an Ideas project that ended up not making it into a final product: https://ideas.lego.com/projects/18258 which i was really rooting for. So when the Dimensions set came out i decided i would try to replicate this design so i could properly display the awesome Chell minifig. I also intend to make a GlaDOS that will hang in the top of a detolf (tops of detolfs have a hole) without all the support brackets used in the Ideas design. Below is the progress I've made so far and i will continue to update as i make more progress and when it's all finished and displayed. I am awaiting parts to round it out a bit plus the parts for GlaDOS, and have taken a few creative liberties from the original Ideas set. There are no instructions for this available (that i saw) so it's all done by eye and tedious part counting. I have not made it modular like the original Ideas design intended, and the back side is abnormally ugly right now that i may eventually cover up with plates. Problems I've encountered (aside from the old: "Dammit, i swore i ordered enough of these pieces!"): - The sentry turret from the Dimensions set is way too big, i'll need to make a few micro ones which i have yet to get parts for. - Getting customs stickers to fit on LEGO bricks is hard (i went with stickers instead of brickbuilding the chamber sign). - Couldn't find a "swamp" like colour to simulate the gross water found in test chambers. - Not sure how to come at making the portals themselves, i may just not include them. - GlaDOS is a very odd design, I've gone with a different one than the Ideas design and the parts are on the way. - Not sure how to connect the floor pieces with the 2 walls, however i may not even need to for display purposes. A bit of the modular nature of the set. However nowhere near as modular as the designer's model. The back needs some serious work haha, plates of all sizes and colours! but they were just from my personal stash until i figured out what i needed. And finally this is the top of the walls that i am waiting for tiles pieces to arrive to cover up the Technic bits, and a few more of the Technic squares to replace some basic bricks on the right side to make it more flush. Updates will come as i get more pieces in the mail Thanks for looking! 8 Quote Link to comment Share on other sites More sharing options...
TheOrcKing Posted October 24, 2015 Share Posted October 24, 2015 So....where's the cake? 2 Quote Link to comment Share on other sites More sharing options...
Sandwraith Posted October 24, 2015 Author Share Posted October 24, 2015 So....where's the cake? Didn't even think of that! Will have to make one Quote Link to comment Share on other sites More sharing options...
Sandwraith Posted October 27, 2015 Author Share Posted October 27, 2015 (edited) Cake! And added Wheatley coming out of a wall panel Actually didn't have a 2x2 round brown piece on hand... so i stole it from Wall-E's plant. Sorry Wall-E. Edited October 27, 2015 by Sandwraithx157 1 Quote Link to comment Share on other sites More sharing options...
TheOrcKing Posted October 29, 2015 Share Posted October 29, 2015 On 10/26/2015 9:21:47, Sandwraithx157 said: Cake! And added Wheatley coming out of a wall panel Quote Link to comment Share on other sites More sharing options...
Sandwraith Posted October 30, 2015 Author Share Posted October 30, 2015 Received most of the parts for GlaDOS. Now i just need a mounting system for the top hole in the Detolf cabinet and the round cover to hide said system. Otherwise i'm just waiting for parts to finish her off, and build a couple micro Turrets. Overall pretty happy with how it turned out. Is it game accurate? not totally, but its resemblance in undeniable. And i had a ton of the Bionicle pieces needed so i chose this design. Once everything complete i'll get it all together in one scene displayed Credit to the GlaDOS build goes to: https://www.youtube.com/watch?v=BPCCsYUgj2I aside from some minor (maybe major) structural integrity fixes. 2 Quote Link to comment Share on other sites More sharing options...
Sandwraith Posted November 3, 2015 Author Share Posted November 3, 2015 All done! I might add some more surface area to it eventually as it looks a tad small in the detolf, but overall very happy with it. As anyone with a Detolf case knows; there is a hole in the top to allow a single light to mount there. I don't use a light in this socket, so it was perfect to mount GlaDOS to. Below is my very simple mounting mechanism haha: And then these gals hide the axle 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.