Zelgazra Posted April 23, 2015 Share Posted April 23, 2015 As the title suggests....When and where possible, once built, I display my sets in a glass cabinet so the dust is never a problem. For shelved displays, what do you guys do to keep your sets looking fresh and like new?A co2 keyboard duster seems like an obvious choice, but I'm still curious if there are simpler, better ideas? Quote Link to comment Share on other sites More sharing options...
Sandwraith Posted April 23, 2015 Share Posted April 23, 2015 Make-up brushes! I have 2 different sized ones and they work wonders. Much cheaper than constantly buying air cans too. 4 Quote Link to comment Share on other sites More sharing options...
Grolim Posted May 1, 2015 Share Posted May 1, 2015 I have a lot on display, not in closed cabinets. Dust is becoming a real problem. I have tried the canned air stuff but found it doesn't really shift the dust off completely if I've left it for ages. I've resorted to using a damp cloth and going over every piece stud by stud, but it really takes ages and I hate doing it. Might give the make-up brush idea a go! Quote Link to comment Share on other sites More sharing options...
Guest brickcrazyhouse Posted May 1, 2015 Share Posted May 1, 2015 we keep the larger sets in rotation. washing the set after they are taken down. luckily gf loves building, I couldn't do it Quote Link to comment Share on other sites More sharing options...
diablo2112 Posted May 1, 2015 Share Posted May 1, 2015 For built CL-lots that are super-dusty, I usually run them under the faucet sprayer, then blow dry them with a hair dryer to keep water spots to a minimum. YMMV. 1 Quote Link to comment Share on other sites More sharing options...
Mindblow21 Posted May 1, 2015 Share Posted May 1, 2015 I use a mew microfiber car wash mitt; works really well to get the dust in between studs which can be difficult and time consuming to get clean. 1 Quote Link to comment Share on other sites More sharing options...
Zelgazra Posted May 1, 2015 Author Share Posted May 1, 2015 Great ideas guys, cheers! Quote Link to comment Share on other sites More sharing options...
Sandwraith Posted May 1, 2015 Share Posted May 1, 2015 I have a lot on display, not in closed cabinets. Dust is becoming a real problem. I have tried the canned air stuff but found it doesn't really shift the dust off completely if I've left it for ages. I've resorted to using a damp cloth and going over every piece stud by stud, but it really takes ages and I hate doing it. Might give the make-up brush idea a go! My brother introduced me to this method as he collects Anime figurines, and i guess this is the recommended method to clean dust in that community. Not only is it super easy and quick; it's sort of fun! It's like painting your LEGO with invisible paint You can get varying sizes too, and depending on the type of brush they can fit right in between studs easily. I've got a long-narrow one i use for tight areas, and then a wide fat one to cover bigger areas. Quote Link to comment Share on other sites More sharing options...
Pseudoty Posted May 1, 2015 Share Posted May 1, 2015 I use a Swiffer 360 for larger areas and a set of these for detailhttp://www.target.com/p/sonia-kashuk-limited-edition-brush-set/-/A-16612423#?lnk=sc_qi_detaillink 1 Quote Link to comment Share on other sites More sharing options...
Thumper Posted May 1, 2015 Share Posted May 1, 2015 Soft "natural hair" makeup brush is definitely the way to go for your most common dust (wide span for large areas & chisel/pencil tip for more detailed parts) However if your dust is more greasy/oily from being closer to the kitchen areas of the house (or where hairspray is being used, dog hair is airborne or, gasp!, smokers are in the house) you'll need to use a synthetic brush as that type of dust won't be picked up by natural hair as efficiently. Natural animal hair bristles can also be statically charged & make dust collection very easy. (you used to be able to do this just keeping them on top of the TV, not so much any more since the FPs arrived) 1 Quote Link to comment Share on other sites More sharing options...
Grolim Posted May 22, 2015 Share Posted May 22, 2015 So I got a set of make up brushes to try out. Mixed results really. The soft brushes really didn't shift the "baked on" dust I have built up on sets displayed for a year or three. But there was a stiffer brush included in the set that had softer plastic or synthetic type bristle that worked pretty well though it is a bit thin so takes to long to go up and down rows of studs multiple times. The other softer make up brushes I can see being useful if done regularly so the dust is just surface stuff. I was thinking of getting a super soft toothbrush to try. Just have to remember to not put it in the bathroom Quote Link to comment Share on other sites More sharing options...
jmdt Posted May 22, 2015 Share Posted May 22, 2015 What is the best way to remove dust from sets you have on display? What do you do before taking apart a larger set for storage?Thanks! Quote Link to comment Share on other sites More sharing options...
Grolim Posted May 22, 2015 Share Posted May 22, 2015 What is the best way to remove dust from sets you have on display? What do you do before taking apart a larger set for storage?Thanks!There's a few good ideas in the posts above. Brushes, mitts, etc. Plus washing and drying sets that are pulled apart. Quote Link to comment Share on other sites More sharing options...
GhostDad Posted May 22, 2015 Share Posted May 22, 2015 If you run lots of HEPA air filters in your house/apartment, it will cut down on dust deposition on everything, including displayed Lego, by taking it out of the air before it can land. Higher shelves also gather less dust than lower ones. In general, keeping the dust from landing is much easier than trying to get rid of it afterwards. The other option is to regularly play with your Lego displays! Take that SSD out for a spin around the block in the rain and nature will dust it for you... 1 Quote Link to comment Share on other sites More sharing options...
jmdt Posted May 23, 2015 Share Posted May 23, 2015 Thanks for the suggestions! I saw the suggestions higher up when my post was (appropriately) moved. My (limited) technique so far has been to take it apart and run it through water (or through the washing machine with non sensitive pieces). It seemed that there must have been a more efficient way. I've read elsewhere (for a different purpose) that people have used dryer sheets to clean their house because it apparently repels dust. Has anyone tried this on Lego? Quote Link to comment Share on other sites More sharing options...
Grolim Posted May 23, 2015 Share Posted May 23, 2015 So I got myself a new toothbrush today and it seems to be working great, especially on the build up I have on my SSD. The make-up brushes have also worked pretty well on my Orthanc and Tumbler. Quote Link to comment Share on other sites More sharing options...
10230 Posted May 23, 2015 Share Posted May 23, 2015 I've read elsewhere (for a different purpose) that people have used dryer sheets to clean their house because it apparently repels dust. Has anyone tried this on Lego?I haven't tried it, but it should work. However, the sheets collect dust, and don't repel it. Quote Link to comment Share on other sites More sharing options...
Thumper Posted May 23, 2015 Share Posted May 23, 2015 ... I've read elsewhere (for a different purpose) that people have used dryer sheets to clean their house because it apparently repels dust. Has anyone tried this on Lego? Don't think I would use new dryer sheets (like Bounce) as they would leave an oily residue behind, that's basically how they work - by smearing oily gunk all over your clothes, perhaps a used one after it's become light & fluffy, but then again it's the static in the material that you want to draw the dust away from the Lego. A swifer sheet might work well thou. if you take swifer sheets & cut them up into little strips, bundle them up with an elastic band on a stick you can make a great little "feather" duster. Quote Link to comment Share on other sites More sharing options...
jmdt Posted May 23, 2015 Share Posted May 23, 2015 I love that there is so much knowledge on this site and people are so great about sharing it. Thanks!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.